Author: hwa

TOKYO, Japan, September 9, 2025 - (JCN Newswire via SeaPRwire.com) – The Honda Foundation (Founders: Soichiro and Benjiro Honda, President: Hiroto Ishida) has decided to award the 2025 Honda Prize to Dr. Kenichi Iga (Honorary Professor at Institute of Science Tokyo and 18th President of former Tokyo Institute of Technology), for his conception of Vertical-Cavity Surface-Emitting Laser (VCSEL) and pioneering contributions to its basic research, and his leadership in its practical application. The VCSEL emits light vertically from the chip surface and enables high-density array formation*1 and high-density integration.*1 A structure integrating multiple laser elements arranged in a regular pattern. Enables high-density integration and simultaneous multi-point irradiation.Solving the challenges of semiconductor lasersSemiconductor lasers are laser oscillators*2 that operate on power sources comparable to those of general electronic circuits, using tiny elements with sides measuring less than 1mm. Today, they are used in a wide range of fields in daily life and industry, such as optical fiber communications and reading optical discs like DVDs. This technology was significantly advanced toward practical application by Dr. Kenichi Iga, who proposed the surface-emitting laser as a type of semiconductor laser. It possesses characteristics not found in conventional semiconductor lasers, such as stable oscillation at a single wavelength, ease of mass production, the ability to continuously vary wavelength, and low power consumption.Technological innovation through surface-emitting lasersCompared with conventional semiconductor lasers which emit light horizontally relative to the substrate, VCSEL emits light vertically, making it more compact, and produces less interference among neighboring modes, enabling high density integration. Surface-emitting lasers are an indispensable technology in short-range LiDAR*3, which precisely maps the state of an automobile’s surroundings (ranging from tens of centimeters to several meters).High-density placement enables simultaneous multi-point emission over a wide area, allowing instantaneous scanning. Furthermore, minimal wavelength variation is key to enabling high-precision measurement. Additionally, the compact and thin form factor facilitates easy integration into bumpers, mirrors, and doors, and its low power consumption is also considered an excellent characteristic for automotive components.*2 A device that continuously generates waves of a specific frequency, when waves emitted from an amplifier are fed back to the amplifier (feedback).*3 Technology that measures distance to and shape of an object by irradiating it with laser light and analyzing the reflected light data.Realizing practical application of surface-emitting lasersDr. Kenichi Iga, who pioneered the practical application of surface-emitting lasers, proposed the concept in 1977. In 1988, Dr. Fumio Koyama (currently Distinguished Professor/Professor Emeritus at the Institute of Integrated Research, Institute of Science Tokyo), a student of Dr. Iga, succeeded in achieving continuous-wave operations at room temperature, paving the way for practical implementation. Since then, researchers worldwide have engaged in surface-emitting laser research, with related papers now exceeding 60,000 globally. Worldwide adoption and development efforts by numerous companies have led to commercialization of the technology, bringing significant transformations to people’s lives, enabling ultra-high-speed, high-capacity parallel communication in data centers and LANs, energy savings, 3D facial recognition in smartphones, and expansion into LiDAR.The Honda Prize award ceremony is scheduled to be held at the Imperial Hotel Tokyo on November 17, 2025. In addition to the prize medal and diploma, the laureate will be awarded a total of 10 million yen.* For details, please refer to the following:Honda Foundation press release: https://www.hondafoundation.jp/news/view_en/1795Honda Foundation website | Achievement Commentary: https://www.hondafoundation.jp/commemoration/index_en/285/year:2025 Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

The pursuit of an exhilarating drive that allows true dialogue between the driver and car.The evolution of a more aggressive, sportier interior and exterior design.Enhanced Lexus Safety System + and next-generation multimedia system deliver greater safety and peace of mind.Lexus IS (Prototype)TOKYO, September 9, 2025 - (JCN Newswire via SeaPRwire.com) - Lexus world premiered the new IS on Tuesday, September 9. The new model will go on sale in various markets starting in early 2026.Since its debut in 1999, the first-generation IS has embodied the pursuit of driving enjoyment as a compact FR sports sedan. Over time, it has come to represent the very essence of the Lexus driving experience, earning enduring praise for its dynamic performance and bold, sporty design. With cumulative sales of approximately 1.3 million units across 40 countries and regions, the IS has continued to resonate with drivers around the world for more than 25 years. Its development has involved rigorous testing at the Toyota Technical Center Shimoyama and other key locations worldwide, in a relentless effort to refine the distinctive performance feel known as the "Lexus Driving Signature."The latest update introduces*1 two variants: the IS 300h and IS 350. With "Refinement in performance and design" as the key development theme, the IS has been further polished to enhance the qualities it has long pursued, an "Engaging driving experience that allows dialogue with the car" and an "Aggressive, sporty design".In driving performance, the goal was to further refine steering feel and vehicle stability. The electric power steering (EPS*2) uses a variable gear*3 ratio to reduce steering angle at intersections and through successive corners, improving steering feel. In addition, the adoption of a linear-solenoid type AVS*4 achieves a high-level balance of vehicle stability and reduced road-surface shock, resulting in improved driving comfort.The exterior has been updated with a new front design that accentuates the IS's low center of gravity and wide stance, reinforcing its bold, commanding presence. The "F SPORT" model adds to this dynamic appeal with a newly designed rear spoiler that improves aerodynamic performance, along with newly styled 19-inch lightweight aluminum wheels*5 that reflect its sharp, responsive driving character.The exterior color lineup has been expanded to a total of eight options*1, with the addition of Neutrino Gray, a new hue that expresses a dynamic sense of motion through its hard-toned light gray base infused with metallic highlights. Designed to reflect the sporty character of the IS, the color palette offers a range of options to suit diverse customer lifestyles and preferences.The interior is thoughtfully crafted with a focus on functionality, an essential quality in the cockpit of a compact FR sports sedan, creating an environment that keeps the driver fully engaged with the road. The center display has been enlarged to 12.3 inches, offering excellent visibility and intuitive operation while aligning with the driver's natural line of sight. The TFT LCD meter in front of the driver has also been increased to 12.3 inches, delivering clear and easy to read graphics that communicate information directly and intuitively. For the interior design, the newly developed "Forged Bamboo" ornamentation has been applied to the upper console and start switch bezel. The natural bamboo fibers create a distinctive "In-ei" shading effect that captures the IS's dynamic energy and enhances the sporty feel of the cabin. A new interior color, "Prominence," inspired by the vivid glow of solar flares, helps to create an aggressive and sporty cabin atmosphere.Additional refinements include expanded features in the Lexus Safety System +, along with the introduction of Advanced Drive [Lexus Teammate Advanced Drive*6], an advanced driver assistance system that supports highway driving and helps make long distance travel more relaxed and comfortable.Full press release (vehicle details) attached as PDF. Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, Japan, September 8, 2025 - (JCN Newswire via SeaPRwire.com) – Repsol Honda HRC rider Toni Bou (Spain, 38 years old) has won the 2025 FIM* Trial World Championship (TrialGP). He has clinched his 19th consecutive title, extending his own record, in Round 7 in Geddington, Great Britain, held on September 6-7.*FIM: Fédération Internationale de MotocyclismeToni BouToni Bou and Montesa COTA 4RTThe Repsol Honda HRC rider signs off for 2025 with his 38th title, while Gabriel Marcelli finishes third overall.The 2025 TrialGP World Championship season concluded in Geddington, England, on Sunday. Toni Bou capped off a great campaign with another victory, his 12th of the year, and Gabriel Marcelli finished the year in third place overall.Bou came into the first race of the day having secured the championship on Saturday. From the opening zones on Sunday, he was solid and consistent, leading from start to finish. Rain that appeared in the final part of the race, making the zones more difficult, did not prevent the Repsol Honda rider from claiming another victory -with 21 penalty points.The second race was no less demanding, as his rivals provided a significant challenge. However, the 38-time world champion maintained his pace and secured another victory that confirmed his absolute dominance in 2025. He was also the fastest in the final Power Section of the season, which earned him an extra point in the overall standings.Toni Bou | Repsol Honda HRC“We had a perfect weekend. Yesterday we clinched the title and today we won both races plus the Power Section, so there's no better way to end the season. We've achieved everything we could, and I don't think we could ask for more. The consistency and all the hard work we've done throughout the season have been noticeable. It's been a very good year, with no injuries, and I've been able to be consistent and competitive from start to finish. It's one of the best seasons I've had. I want to thank the team, Honda, and HRC.”Takahisa Fujinami | Repsol Honda HRC Manager“This was a very good season, full of great moments. Toni, Gabri, and the team gave their all in every race, and I'm very satisfied with all the work done. Overall, the year was very positive, as we took another title with Toni, and Gabri achieved his first victory. Today, they both performed at the same high level, despite making some mistakes, and we finished with both of them on the podium again. I would like to thank Honda, HRC, and our sponsors once again for their dedication throughout the year.”Koji Watanabe, President of Honda Racing Corporation“I would like to express my heartfelt respect for Toni on winning his 19th consecutive title in the Trial World Championship. This unprecedented achievement was made possible by his exceptional riding skills, relentless effort, and the dedicated support of his team. Toni's pursuit of excellence has deeply inspired motorsports fans around the world and will surely serve as a goal for the next generation of riders. Looking forward to even more record-breaking accomplishments, HRC will continue to fully support Toni. I would like to express my gratitude to the many sponsors who support our racing activities and all the trial fans around the world who have always given us their enthusiastic support.”About Toni BouBirth Date:October 17, 1986 (38 years old)Birthplace:SpainCareer Highlights: 2003Trial World Championship debut2007Joins Repsol Montesa HRC, Wins his first Trial World Championship and X-Trial World Championship2008 - 2024Wins every Trial World Championship & X-Trial World Championship(18 each, 36 total)2025April SeptemberWins his 19th consecutive X-Trial World ChampionshipWins his 19th consecutive Trial World Championship(Total 38th consecutive Trial World Championship) Montesa COTA 4RT OverviewEngine: Liquid-cooled 4-stroke OHC single-cylinder engineFrame: Aluminum twin-tubeTires: 21-inch (front) 18-inch (rear) Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, September 8, 2025 - (JCN Newswire via SeaPRwire.com) - Eisai Co., Ltd. (Headquarters: Tokyo, CEO: Haruo Naito, “Eisai”) announced today that the results from a Phase Ib clinical trial (NCT06462404) of its in-house developed novel selective orexin 2 receptor agonist E2086 have been presented at the World Sleep 2025 congress, held in Singapore from September 5 to 10. These data demonstrate that once-daily dosing of E2086 has the potential to improve daytime wakefulness in individuals with narcolepsy type 1 (NT1). Clinical Trial DesignThis randomized, double-blind, single-dose, multiple crossover, Phase Ib clinical trial was conducted in the United States and Canada to evaluate the efficacy, safety, and tolerability of E2086 in people meeting criteria for NT1, compared with placebo and an existing treatment (modafinil). There were a total of 21 patients in the clinical trial (21 patients received the study medication, 19 patients completed the trial). Participants received a single dose of one of five treatments (E2086 5 mg, 10 mg, 25 mg, placebo, ormodafinil) shortly after waking, efficacy assessments were conducted for each treatment.Efficacy was assessed using the objective Maintenance of Wakefulness Test (MWT)*1 to evaluate excessive daytime sleepiness (EDS), and subjective sleepiness was measured using the Karolinska Sleepiness Scale(KSS)*2 at the end of each MWT session.Clinical Trial ResultsAs evaluated by MWT, all doses of E2086 demonstrated statistically significant longer sleep latencies*3 – a measure of the ability to stay awake – compared with placebo (P

TOKYO, Japan, September 8, 2025 - (JCN Newswire via SeaPRwire.com) – Honda Motor Co., Ltd. (Honda) today announced it has decided to introduce the UNI-ONE hands-free personal mobility device to market and will begin sales to corporate customers in Japan on September 24, 2025.Honda positions UNI-ONE as a “mobility device to be used at destinations” after people arrive by car or another means of transportation. This envisions various use cases, including moving customers around designated areas within certain facilities, or to support diverse individuals, including seniors, to enhance performance and increase productivity in offices and other workplaces.The UNI-ONE will reduce the physical burden people experience on their legs and lower back while walking around, which will encourage more people who have been giving up on opportunities for an outing due to a concern about the physical burden. By commercializing UNI-ONE, Honda will strive to contribute to the “joy and freedom of mobility” for more people. UNI-ONEBy leveraging technologies amassed through its research on robotics, including ASIMO, a humanoid robot, Honda created UNI-ONE as a personal mobility device the user can steer simply by shifting body weight while sitting and keeping both hands free to move naturally in all directions as if they were walking. UNI-ONE was designed to be easy to use for people of all ages, from young children to the elderly, without requiring complex operation.Honda has continued to develop personal mobility devices designed to work in harmony with people, such as U3-X (introduced in 2009) and UNI-CUB (introduced in 2012). As a successor model featuring further advanced technologies, UNI-ONE was introduced for the first time at the International Robot Exhibition 2022 (iREX 2022) and has since been well received by visitors of various exhibitions and test-ride events.Since 2023, Honda has been working with some customers to conduct pre-launch paid trials of the UNI-ONE while making progress in initiatives toward mass production and commercialization. Since it obtained type certification as a “small mobility vehicle,*1” which can be used legally on public roads*2, the UNI-ONE has further expanded its scope of applications.*1 A vehicle is identified as a “small mobility vehicle” and considered equivalent to a pedestrian when it fulfills the following requirements:1) Vehicle dimensions must be below the following measurements:a) Length: 120cmb) Width: 70cmc) Height: 120cm2) Vehicle structure must fulfill the following conditions:a) Use an electric motor as the prime mover.b) Maximum speed must not exceed 6km/h.3) The vehicle must not have any sharp protrusions that could pose a risk of causing harm to pedestrians.*2 Certification of the previous version and the all-new version of UNI-ONE was obtained on January 30 and July 10, 2025, respectively.Intended use cases for UNI-ONEHonda is striving to support people to make their daily lives more enjoyable and comfortable by offering UNI-ONE to be used for various purposes: including reducing the physical burden on users while moving them around designated areas within certain facilities; or reducing the workload of people while they are in an office or other workplaces.Moving around inside a facility:Even if there are comfortable means of transportation to the destination, having to walk a long distance/time at the destination can be a burden, causing some people to give up their opportunity for an outing. UNI-ONE can address such issues and encourage more people to enjoy their outings. Reducing workload at a workplace:Leveraging its unique feature — to enable users to move around as if they are walking while keeping both hands free — UNI-ONE can contribute to productivity improvement and/or a reduction of the workload for people working in the field of office/administration. In addition, the utilization of UNI-ONE can support a diverse workforce, including those who may have difficulty walking, to play active roles in their workplaces. Examples of facilities suitable for the intended use of UNI-ONE1) Theme parks, tourist destinations, parks2) Airports, commercial facilities, museums3) Offices, medical facilities4) Smart cities, station areas5) Outlet malls, shopping malls6) Exhibition halls, warehousesUNI-ONE sales strategyHonda will begin sales of the UNI-ONE to corporate customers in Japan in the form of a “service contract” that packages the UNI-ONE body, swappable battery, maintenance and insurance services. All sales will be conducted through the official UNI-ONE website.Official UNI-ONE websiteURL: https://www.honda.co.jp/UNI-ONE/ (Japanese)Product information, case studies of UNI-ONE utilization and information on test-ride events open to the public are also available on this website. Planned sales volumeLimited to 1,000 units (in a 5-year period until 2023)UNI-ONE “service contract” package- 1 UNI-ONE device- 2 swappable batteries- 1 battery charger- Regular inspection- On-site repair service- Call center support- Insurance- UNI-ONE operation management appMonthly fee per unit (including taxes) Number of units under contractLess than 10 unitsMore than 10 unitsContract term3 years120,000 yen100,000 yen6 years90,000 yen80,000 yenFor use at limited-time events and other special occasions, Honda will offer a short-term rental service, available starting from one day. The package includes one unit of UNI-ONE, two swappable batteries, one charger and insurance for the daily fee of 55,000 yen (including taxes) per unit. Example of a facility which will introduce UNI-ONE for customer use After the start of sales, UNI-ONE will be available for customer use at the Sanrio Character Park “Harmonyland” starting on Sunday, October 19, 2025.Harmonyland is an outdoor theme park set in the natural landscape of Hiji-machi, Hayami-gun, Oita Prefecture, Japan. The park welcomes visitors of all ages with the wish that all visitors, including those who are concerned about walking a long time within the park — such as multi-generation families with small children, the elderly, and people with disabilities — will enjoy the park with their friends and families without facing the burden of walking. The utilization of UNI-ONE will contribute to the realization of this wish and become a step toward addressing the challenge that people with disabilities often face related to their mobility and recreational activities. For this reason, Harmonyland and Honda came to an agreement to introduce UNI-ONE.About the Sanrio Character Park “Harmonyland”Official website: https://www.harmonyland.jp/Operating company: Sanrio Entertainment Co., Ltd.Location address: 5933 Fujiwara, Hiji-machi, Hayami-gun, Oita Prefecture, Japan Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

Perspective of O Mon 4 Thermal Power Plant project (Photo: Petrovietnam)Singapore, September 8, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Power, a power solutions brand of Mitsubishi Heavy Industries, Ltd. (MHI), today announced that it has been awarded a contract in cooperation with Doosan Enerbility Co, to supply two advanced M701JAC gas turbines and auxiliary equipment for the O Mon 4 Gas Turbine Combined Cycle (GTCC) Power Plant. The agreement was signed in August 2025.The O Mon 4 plant, with a designed capacity of 1,155MW, is developed by the Vietnam National Industry-Energy Group (Petrovietnam), with the engineering, procurement and construction (EPC) contract awarded to a consortium of Doosan Enerbility of South Korea and Vietnam's Power Engineering Consulting Joint Stock Company 2 (PECC2). As the first deployment in Vietnam, Mitsubishi Power will supply the two JAC gas turbines, which are recognized as the world's most efficient large-frame turbines, with more than 64% combined cycle efficiency and proven reliability through 3 million operational hours.The groundbreaking ceremony for O Mon 4 took place in late August in Can Tho, South Vietnam, marking the start of construction, and the plant is scheduled for completion in 2028.O Mon 4 will provide stable electricity for the Mekong Delta, boosting Petrovietnam's installed capacity to more than 9,300MW, equivalent to about 10% of Vietnam's national power system. The project is part of the Block B - O Mon gas-to-power project chain, a national priority designed to strengthen Vietnam's energy security and accelerate the country's energy transition.Akihiro Ondo, CEO and Managing Director of Mitsubishi Power Asia Pacific Pte. Ltd., said, "The O Mon 4 project marks a milestone in Vietnam's energy journey, and we are honored to contribute our state-of-the-art JAC gas turbines to this key power plant. Building on our proven track record across Asia, we are committed to delivering world-class reliability and performance for O Mon 4, working together with our partners."With O Mon 4, Mitsubishi Power strengthens its support for Vietnam's Power Development Plan VIII (PDP8), which calls for diversifying the energy mix, reducing coal dependency, and expanding natural gas and renewable energy. The project also contributes to Vietnam's national target of achieving net zero emissions by 2050.Mitsubishi Power remains committed to advancing its industry-leading gas turbine technologies to deliver reliable electricity, strengthen national energy systems, and support sustainable economic growth across Vietnam and Asia Pacific. Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

Kawasaki, Japan, September 8, 2025 - (JCN Newswire via SeaPRwire.com) - Fujitsu today announced the development of a new reconstruction technology for generative AI. The new technology, positioned as a core component of the Fujitsu Kozuchi AI service, will strengthen the Fujitsu Takane LLM by enabling the creation of lightweight, power-efficient AI models.Fujitsu’s new reconstruction technology is built upon two core advancements:Quantization: A technique that significantly compresses information stored in the connections between neurons that forms the basis of an AI model’s "thought" processSpecialized AI distillation: A world-first (1) method which simultaneously achieves both light weighting and accuracy exceeding that of the original AI modelApplying 1-bit quantization technology to Takane has enabled a 94% reduction in memory consumption. This advancement has achieved the world's highest accuracy retention rate of 89% (2) compared to the unquantized model, along with a 3x increase in inference speed. This significantly surpasses the accuracy retention rate of less than 20% typically achieved by conventional mainstream quantization methods like GPTQ. This breakthrough enables large generative AI models that previously required four high-end GPUs to run efficiently on a single low-end GPU.This unprecedented light weighting capability will enable the deployment of agentic AI on edge devices such as smartphones and factory machinery. This will lead to improved real-time responsiveness, enhanced data security, and a radical reduction in power consumption for AI operations, contributing to a sustainable AI society.Fujitsu plans to sequentially offer customers globally trial environments for Takane with the applied quantization technology starting in the second half of fiscal year 2025. Furthermore, Fujitsu will progressively release models of Cohere's research open-weight Command A quantized using this technology, available via Hugging Face (3) starting todayMoving forward, Fujitsu will continue to advance research and development that significantly improves the capabilities of generative AI while ensuring its reliability, aiming to solve more complex challenges faced by customers and society, and to open new possibilities for generative AI utilization.Technology details Many tasks performed by AI agents require only a fraction of the general capabilities of an LLM. The newly developed generative AI reconstruction technology is inspired by the human brain's ability to reconstruct itself, including by reorganizing neural circuits and specializing in specific skills in response to learning, experience, and environmental changes. It efficiently extracts only the knowledge necessary for specific tasks from a massive model with general knowledge, creating a specialized AI model that is lightweight, highly efficient, and reliable. This is achieved through the following two core technologies:1. Quantization technology for streamlining AI “thought” and reducing power consumption:- Parameter compression:* Technology compresses generative AI parameter information, reducing model size and power consumption, and accelerating performance- Quantization error solution:* Previous challenge: exponential quantization error accumulation in multi-layered neural networks (e.g., LLMs)* Fujitsu's solution: technology for quantization error propagation, a new quantization algorithm* Technology for quantization error propagation prevents error growth through cross-layer error propagation, based on theoretical insights- 1-Bit quantization achievement:* 1-bit LLM quantization achieved via Fujitsu's proprietary, world-leading optimization algorithm for large-scale problems2. Specialized distillation for condensing expertise and improving accuracy:- Brain-inspired optimization:* AI model structure optimization, mirroring brain processes of knowledge strengthening and memory organization- Model generation & selection:* Foundational AI model modification: pruning (unnecessary knowledge removal), transformer block additions (new capability impartation)* Diverse candidate model generation* Optimal model selection: Neural Architecture Search (NAS) with Fujitsu's proxy technology, balancing customer requirements (GPU resources, speed) and accuracy- Knowledge distillation:* Knowledge transfer from teacher models (e.g., Takane) into the selected structural model- Beyond compression:* Model compression with enhanced specialized task accuracy, surpassing foundational generative AI model performance- Demonstrated results (sales negotiation prediction):* Text QA task (sales negotiation outcome prediction, Fujitsu CRM data): - 11x inference speed increase - 43% accuracy improvement* Student model (1/100th parameter size) achieved higher accuracy than teacher model* 70% reduction in GPU memory and operational costs* Enhanced sales negotiation outcome prediction reliability- Demonstrated results (image recognition):* 10% improvement in unseen object detection accuracy (4) over existing distillation techniques* Significant breakthrough: over three times the accuracy improvement in this domain over two yearsFor more details, please visit: https://global.fujitsu/-/media/Project/Fujitsu/Fujitsu-HQ/pr/news/2025/09/08-01-en.pdfFuture plansMoving forward, Fujitsu will further enhance Takane leveraging this technology, empowering customer business transformations. Future plans include lightweight, specialized Takane-derived agentic AI for finance, manufacturing, healthcare, and retail. Further technology advancements aim for up to 1/1000 model memory reduction with maintained accuracy, enabling ubiquitous high-precision, high-speed generative AI. Ultimately, specialized Takane models will evolve into advanced AI agent architectures for deeper world understanding and autonomous complex problem-solving.About FujitsuFujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers around the globe, our 113,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: AI, Computing, Networks, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.6 trillion yen (US$23 billion) for the fiscal year ended March 31, 2025 and remains the top digital services company in Japan by market share. Find out more: global.fujitsuPress ContactsFujitsu LimitedPublic and Investor Relations DivisionInquiries Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

- Fair attracts participation of more than 260 brands from 25 countries and regions, achieving its largest-ever scale and level of internationalisation- Over the four‑day period, CENTRESTAGE welcomed over 10,000 trade buyers from 91 countries and regions, with the number of buyers from the UK, Mainland China, India and Indonesia showing significant growth- Internationally acclaimed couturier Guo Pei and world-renowned fashion legend Professor Jimmy Choo OBE hosted talks at the fair; Guo Pei also staged her solo couture show themed “Gilternity: An Everlasting Radiance”, at CENTRESTAGE ELITES- Survey findings reveal that over 55% of respondents expect sales to increase in the coming 12 to 24 months- 38% of respondents believe that rising demand from emerging markets is the major opportunity for business, while 36% believe that fashion accessories hold the greatest growth potential for the industryHONG KONG, Sep 6, 2025 - (ACN Newswire via SeaPRwire.com) – CENTRESTAGE, organised by the Hong Kong Trade Development Council (HKTDC) and sponsored by the Cultural and Creative Industries Development Agency (CCIDA) of the Government of the Hong Kong Special Administrative Region, drew to a successful close today. Celebrating its 10th edition, this year’s event ran on an unprecedented scale. Over 260 brands from 25 countries and regions participated in the four-day event, attracting over 10,000 buyers from 91 countries and regions. Buyer participation from the UK, Mainland China, India and Indonesia recorded a significant increase, further strengthening Hong Kong’s role as Asia’s fashion hub and a centre for East‑West cultural exchange.CENTRESTAGE and Salon de TIME, the HKTDC’s concurrent fashion event, were fully open to the public free of charge. The public count for the events exceeded 19,000 visits, successfully assisting exhibitors in expanding their customer base and helping to promote the development of the creative sector.Sophia Chong, Deputy Executive Director of the HKTDC, said: “Over the past decade, CENTRESTAGE has become an essential trade and exchange platform for local, Asian and international fashion brands. This year’s fair set records in terms of scale and internationalisation, bringing together a wide range of globally renowned design brands which participated for the first time, including Saul Nash from the UK, HENRIK VIBSKOV from Denmark and THE NERDYS from Japan. Internationally acclaimed couturier Guo Pei and world-renowned fashion legend Professor Jimmy Choo OBE also appeared at CENTRESTAGE to host inspiring sharing sessions. The event successfully attracted prominent local and overseas buyers, including leading retailers and procurement groups such as Machine-A from the UK, Sugar Srl from Italy, Daimaru Matsuzakaya Department Stores from Japan, Zalora from Indonesia and ESSX. from the United States, as well as helping local brands expand internationally and highlighting Hong Kong’s unique appeal as Asia’s fashion hub.”Over 55% respondents expect sales growth; emerging markets seen as keyThe HKTDC conducted a survey during the fair, interviewing more than 400 exhibitors and buyers to gauge their views on product trends and the outlook for the fashion industry. The survey revealed that 56% of respondents expect sales to increase over the next 12 to 24 months, while 40% anticipate that sales will remain unchanged, reflecting an optimistic stance towards the industry’s sales landscape.Respondents also identified key challenges such as fluctuations in the global economy (44%) and keen competition within the industry (40%). In terms of opportunities. 38% said their greatest opportunities lay in rising demand from emerging markets.Global designers explore market frontiers; cross-cultural craftsmanship shinesFor the first time, the United Kingdom joined CENTRESTAGE as Partner Country, presenting 16 highly creative fashion brands and emerging designers. The UK pavilion highlighted diverse styles and sustainable concepts, partnering with the JCA-London Fashion Academy founded by Professor Jimmy Choo OBE to showcase works by a new generation of designers. On the first day of the fair, a UK fashion show celebrated the craftsmanship and forward‑looking vision of British fashion.This year’s CENTRESTAGE featured six themed zones showcasing the latest fashion trends and creative forces. The newly launched Accessories zone highlighted functional yet stylish accessory ranges in response to market demand. The survey revealed that, same as last year, fashion accessories were seen by respondents as having the greatest growth potential among fashion product categories in major sales markets (36%).Cross-cultural craftsmanship has also emerged as a rising design trend. This year’s fair not only presented selected pieces from internationally acclaimed couturier Guo Pei’s entirely hand‑crafted collection “Gilternity: An Everlasting Radiance”, but also brought together brands from diverse cultural backgrounds, showcasing fashion works that blend traditional techniques such as embroidery, weaving and tie-dyeing. They included Hong Kong brand Yue Hwa Chinese Products Emporium Limited which showcased designs utilising Gambier Canton Silk, a national intangible cultural heritage fabric.Other highlights included Hong Kong brand Isabelle.C, which incorporates the Chinese intangible heritage technique of Kesi (silk tapestry weaving) into its designs; Thai brand Lava Laweng, which showcases Thai ethnic culture and weaving craftsmanship; and Macao brand Yu Kwa, founded by Lin Yingwen, the fifth-generation inheritor of the intangible cultural heritage production of gold-embroidered skirt jackets. These works not only showcase exquisite craftsmanship and rich cultural depth, but also breathe new life into traditional techniques within the modern fashion landscape.As a first-time exhibitor at CENTRESTAGE, Vald Showroom from Denmark brought a curated selection of brands, including Danish label HENRIK VIBSKOV which is known for its runway appearances in Copenhagen and Paris. The showroom is planning to expand into new markets across Asia. “We are very excited to learn about local customers’ preferences and see how buyers respond to our collections in terms of quality, price, fit and style,” said Jacob Jensen, the company’s CEO.Hong Kong brand Imellda Ho Millinery specialises in handmade custom hats and headpieces. Designer Imellda Ho said this year marks her first participation at CENTRESTAGE under her own brand name, and that the fair reflected the HKTDC's international vision. “The team even anticipated needs I hadn't considered. This 'thinking beyond the designer' support is exactly what independent brands need most,” she said. Ms Ho added that although the custom headwear market is relatively small, the fair offers opportunities for brands to expand into overseas markets. She commended the HKTDC for equipping designers with hands-on styling workshops and expert-led brand development support, representing “irreplaceable value for independent designers”.Buyers from around the world were drawn to the fair, praising its global brand appeal and diverse product offerings. Many expressed strong interest in the distinctive creativity of Hong Kong designers. Marianna Kuvvet, Brand Director of Tomorrow Ltd, a brand accelerator, said: “This was my first time attending CENTRESTAGE. What stood out to me most was the calibre of local talent.” Stavros Karelis, Founder and Buying Director at Machine-A, a UK-based concept store, said that CENTRESTAGE is proven to be an exciting platform for new talent, while providing international buyers with a valuable gateway to explore the pulse of Asia’s vibrant and diverse market. “I was particularly impressed by local Hong Kong designers and brands, such as WEN PAN and Kinyan Lam from Genau Studio. The fair beautifully captured the fusion of local and global design talents,” he said. Despite it being his inaugural visit to CENTRESTAGE, Mr Karelis allocated a specific budget to acquire standout designs discovered at the fair, underscoring its importance as an influential global fashion platform.Spectacular fashion shows with international designers dazzle audiencesSome 50 fashion shows and events were staged during the fair. The opening gala show, CENTRESTAGE ELITES, was in the spotlight on 1 September at M+ in the West Kowloon Cultural District, with celebrated couturier Guo Pei unveiled her collection themed “Gilternity: An Everlasting Radiance”, featuring more than 30 handcrafted masterpieces that transformed fleeting moments into timeless brilliance. On 4 September, Guo Pei also hosted a masterclass to share her design journey and philosophy with an enthusiastic full house.Marking the 10th anniversary of the Fashion Hong Kong overseas promotion campaign series, Fashion Hong Kong presented a show under the theme “A Decade in Design: What Is Seen' What Is Felt'”. Four Hong Kong brands – ANGUS TSUI, ARTY:ACTIVE, IP AXIS INDUSTRIAL STUDIO and selfFab. – unveiled creative collections reflecting the journeys of Hong Kong designers, blending vision with emotion. The show received enthusiastic acclaim from a multitude of industry professionals, celebrities and fashion enthusiast in a packed venue. The public can revisit the show’s highlights on the CENTRESTAGE and Fashion Hong Kong websites, the Fashion Hong Kong Instagram, and HKTDC Facebook and YouTube channels.The FASHIONALLY platform also showcased four emerging brands – phenotypsetter, MARCCH, Oplus2 and OUS – in its FASHIONALLY Collection #25, highlighting the creativity and energy of Hong Kong’s new generation of designers. FASHIONALLY Presentation featured LAPEEWEE, MOODLABBYLORRAINE and KOWLOON CITY BOY, who used immersive stage installations to bring their latest works vividly to life.Several other Hong Kong brands launched new collections at CENTRESTAGE. DORISKATH collaborated with bridal label Vincci to mark its 10th anniversary, 112 mountainyam presented its Spring/Summer 2026 collection, while other participants included NATACHA VAN and more. LOCAL POWER 2025, a cross-cultural project curated by the Asian New Generation Creativity Design Association, was officially launched during CENTRESTAGE. Dorian Ho, Chairman of the Association said: “CENTRESTAGE is a key fashion platform in Asia, and launching the project here helps attract greater attention. We also invited five Korean designers to participate, and the project successfully attracted more than 30 buyers from various markets including Europe, Southeast Asia, Japan and Mainland China, to connect with us for just first two days, opening up opportunities for international collaboration.”The finals of the Redress Design Award 2025 – a competition dedicated to advancing circular fashion and now in its 15th year – were successfully staged at CENTRESTAGE. Multiple awards were presented during the event, with the championship title jointly awarded to designers Carla Zhang and Hugo Dumas. Nathan Moy was awarded the “Hong Kong Best”, while other contestants also showcased their unique sustainable fashion designs.Photo download: http://bit.ly/482vCywThe 10th edition of CENTRESTAGE attracted over 10,000 trade buyers from 91 countries and regionsThe annual fashion extravaganza gathered over 260 brands from 25 countries and regions – the largest number of participating brands in the fair’s history. The participation in the Thai pavilion reached a record high this year, bringing together over 40 brands.Internationally acclaimed couturier Guo Pei joined CENTRESTAGE for a masterclass, sharing her design philosophy and creative journey. The event drew a full house of industry professionals, fashion lovers and design students eager to learn and exchange ideas.Several fashion design competitions were held during the fair, including the Young Knitwear Designer Contest organised by the Knitwear Innovation and Design Society. Designer Jason Ying claimed the championship title.Several local fashion labels staged shows during CENTRESTAGE, including the latest collection by DORISKATH.Cross-cultural craftsmanship emerged as a growing trend. The fair brought together design brands from diverse cultural backgrounds, showcasing fashion pieces that incorporate traditional techniques such as embroidery.For the first time, the United Kingdom joined CENTRESTAGE as Partner Country, presenting 16 highly creative fashion brands and emerging designers.The Asia New Generation Cultural Creative Design Association officially launched LOCAL POWER 2025 Hong Kong Fashion in Seoul at CENTRESTAGE.Websites- CENTRESTAGE: www.centrestage.com.hk- Fashion Hong Kong: https://www.fashionhongkong.com/en- Hong Kong Young Fashion Designers' Contest (YDC): www.fashionally.com/enRevisit CENTRESTAGE ELITES:- CENTRESTAGE website: https://www.hktdc.com/event/centrestage/en/livestream- CENTRESTAGE Instagram: https://www.instagram.com/centrestage_hktdc- HKTDC Exhibition Channel Facebook Page:https://www.facebook.com/share/v/1AAMjms6eB/'mibextid=wwXIfr- HKTDC YouTube Channel: https://www.youtube.com/live/dsECvOgiYNE'si=0OLm1S_9hXhjLiYIMedia enquiriesBest Crew Public Relations & MarketingDiana TangTel: (852) 3594 6443 Email: diana.tang@bestcrewpr.comReni KwokTel: (852) 3594 6443 Email: reni.kwok@bestcrewpr.comHKTDC Communication and Public Affairs Department:Sharon Ha Tel: (852) 2584 4575Email: sharon.mt.ha@hktdc.orgKaty Wong Tel: (852) 2584 4524Email: katy.ky.wong@hktdc.orgHKTDC Newsroom: http://mediaroom.hktdc.com/enAbout the HKTDCThe Hong Kong Trade Development Council (HKTDC) is a statutory body established in 1966 to promote, assist and develop Hong Kong's trade. With over 50 offices globally, including 13 in Mainland China, the HKTDC promotes Hong Kong as a two-way global investment and business hub. The HKTDC organises international exhibitions, conferences and business missions to create business opportunities for companies, particularly small and medium-sized enterprises (SMEs), in the mainland and international markets. The HKTDC also provides up-to-date market insights and product information via research reports and digital news channels. For more information, please visit: www.hktdc.com/aboutus. About Cultural and Creative Industries Development Agency (CCIDA)The Cultural and Creative Industries Development Agency (CCIDA) established in June 2024, formerly known as Create Hong Kong (CreateHK), is a dedicated office set up by the Government of the Hong Kong Special Administrative Region (HKSAR Government) under the Culture, Sports and Tourism Bureau to provide one-stop services and support to the cultural and creative industries with a mission to foster a conducive environment in Hong Kong to facilitate the development of arts, culture and creative sectors as industries. Its strategic foci are nurturing talent and facilitating start-ups, exploring markets, promoting cross-sectoral and cross-genre collaboration, promoting the development of arts, culture and creative sectors as industries under the industry-oriented principle, and promoting Hong Kong as Asia’s creative capital and fostering a creative atmosphere in the community to implement Hong Kong’s positioning as the East-meets-West centre for international cultural exchange under the National 14th Five-Year Plan.CCIDA’s website: http://mediaroom.hktdc.com/enDisclaimer: The Government of the Hong Kong Special Administrative Region provides funding support to the project only, and does not otherwise take part in the project. Any opinions, findings, conclusions or recommendations expressed in these materials/events (or by members of the project team) are those of the project organisers only and do not reflect the views of the Government of the Hong Kong Special Administrative Region, the Culture, Sports and Tourism Bureau, the Cultural and Creative Industries Development Agency, the CreateSmart Initiative Secretariat or the CreateSmart Initiative Vetting Committee. Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

Contract for five units received jointly with local firm CTCI, following a similar contract for three units in 2013, aiming to increase output and reduce environmental impact by upgrading existing facilitiesScheduled to start operation sequentially from 2030 to 2031, with successive orders with the same partner based on high degree of trust and solid track recordConceptual rendering of the completed Tung Hsiao Power PlantTOKYO, September 5, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Power, a power solutions brand of Mitsubishi Heavy Industries, Ltd. (MHI), has received a contract for a gas turbine combined cycle (GTCC) power plant project with total generation capacity of 2,800 megawatts (MW) for the Tung Hsiao Power Plant operated by Taiwan Power Company, Taiwan's state-owned electric power industry, in Tung Hsiao, Miaoli County.The project is a full turnkey solution led by Mitsubishi Power, conducted jointly with CTCI Corporation (CTCI), a major engineering and construction company in Taiwan, comprising five units with state-of-the-art M501JAC (J-Series Air-Cooled) gas turbines as the core components. The total contract value, including CTCI's share, for engineering, procurement, and construction (EPC) is approximately 760 billion yen (5.2 billion U.S. dollars).Tung Hsiao Power Plant is located in Tung Hsiao, Miaoli County, approximately 130 km southwest of Taipei. Based on Taiwan's long-term power supply development plan, renewal work is being conducted at the facility to replace existing power plants with new plants. The main focus of the renovation is to increase power generation capacity while at the same time reducing the environmental impact, meeting the rapidly increasing demand for industrial and household electricity in the surrounding regions, as well as contributing to Taiwan's net-zero goals.The five new power plant units are scheduled to start operation sequentially from 2030 to 2031. Mitsubishi Power will supply the M501JAC gas turbines, steam turbines, and auxiliary equipment, while CTCI will be responsible for the construction and BOP (Balance of Plant). The generators will be supplied by Mitsubishi Generator Co., Ltd.Next to the new facility are the GTCC power plants updated in the first phase of the renewal plan, comprising three units with M501J gas turbines supplied by Mitsubishi Power as the core components, which have been in operation since 2018. These units were from a contract received by Mitsubishi Power and CTCI jointly in 2013. This latest contract, with the same partner for the second phase of five units, is underpinned by the high degree of trust from Taiwan Power, backed by an extensive record of successful past performance.Going forward, MHI Group will continue to focus on the widespread adoption of GTCC power plants and other types of highly efficient and reliable gas turbine power generation equipment, contributing to the stable supply of electricity essential for economic development around the world, and the conservation of the global environment through energy decarbonization.About MHI GroupMitsubishi Heavy Industries (MHI) Group is one of the world’s leading industrial groups, spanning energy, smart infrastructure, industrial machinery, aerospace and defense. MHI Group combines cutting-edge technology with deep experience to deliver innovative, integrated solutions that help to realize a carbon neutral world, improve the quality of life and ensure a safer world. For more information, please visit www.mhi.com or follow our insights and stories on spectra.mhi.com Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

Raleigh, North Carolina and Zurich, September 4, 2025 - (JCN Newswire via SeaPRwire.com) - Hitachi Energy, a wholly owned subsidiary of Hitachi, Ltd., and global leader in electrification, today announced a historic investment of more than $1 billion USD to expand the production of critical electrical grid infrastructure in the United States. These investments, among the largest seen in the electrical industry in the U.S., include approximately $457 million USD for a new large power transformer facility in South Boston, Virginia, along with significant expansions of existing facilities throughout the country.Aeiral photo of Hitachi Energy’s South Boston, VA campusThe investments will help meet skyrocketing energy demand driven by AI data centers in line with the Trump Administration’s White House AI Action Plan and promote domestic access to these critical grid technologies. This move also supports the power needs of American manufacturing and other sectors and much-needed grid expansion and modernization efforts. Collectively, these investments will create thousands of jobs, bolster electrical equipment supply chains in the U.S., and contribute to the development of innovative technologies to enhance the security and resilience of the U.S. grid.“If we are going to win the AI race, reindustrialize, and keep the lights on, America is going to need a lot more reliable energy,” said Energy Secretary Chris Wright. “Thankfully, Hitachi is delivering. The Trump administration looks forward to continuing to partner with private industry to ensure the American people access to affordable, reliable, and secure energy and thousands of high-paying jobs."“To lead in AI, America must lead in energy, and this investment proves we’re doing just that,” said Secretary of the Interior Doug Burgum. “Hitachi Energy’s historic investment in U.S. grid infrastructure is more than a single partnership, it signals a growing wave of investment in American energy. This momentum is driven by President Donald Trump's bold, pro-energy policies that are reigniting the American economy and powering the next generation of critical AI data centers with reliable, American-made energy."“Prioritizing domestic production of transformers accelerates President Trump’s energy dominance agenda by fortifying critical supply chains, strengthening U.S. energy security, and ensuring our nation can meet the growing energy demand. Investments like this are essential to powering AI infrastructure and advancing President Trump’s leadership in the global AI race,” said Jarrod Agen, Executive Director of the White House National Energy Dominance Council.“Thank you, Hitachi Energy, for trusting Virginia, again! Hard-working Virginians and a business friendly environment are what first brought Hitachi Energy to the Commonwealth. Now, after years of success here, they are doubling down on that decision with this landmark investment in South Boston,” said Governor Glenn Youngkin. “Eight-hundred and twenty-five new jobs will be transformational for Southside Virginia, as will the power transformers those new hires are set to build. These transformers are critical to our Nation’s electrical grid and will be built right there in Virginia.” Governor Youngkin continued: “We are also proud to announce a major workforce housing project to support Hitachi’s new employees. We are partnering with Halifax County and Virginia Housing to build 96 new homes supported by a grant from the Virginia Workforce Housing Investment Program.”“Particularly at this critical moment for our growing energy demands, I’m excited to see Hitachi Energy expand their Virginia footprint, create hundreds of good-paying jobs in South Boston, and promote American energy security,” said U.S. Senator Mark Warner. “At the local level, this is a great investment in Southside Virginia’s economy and manufacturing industry. At the state and national level, this is an important strategic step to ensure we have the power needed to service our communities, businesses, and growing AI industry. I’m thrilled to see Hitachi Energy bring this important project home to South Boston.” “In August, I visited Hitachi’s facility in Bland to learn about the company’s cutting-edge work. I’m thrilled that Hitachi Energy is expanding its footprint in Virginia by investing $457 million to build a state-of-the-art power transformer facility in South Boston – creating more than 800 jobs and boosting the region’s economy,” said U.S. Senator Tim Kaine. “Virginia’s workforce, educational opportunities, and innovative spirit have made it a great place to do business, and I look forward to continuing to partner with Hitachi to boost domestic manufacturing in the Commonwealth.”“A vigorous and reliable electric grid is critical for the American economy and American energy dominance. Bringing power transformer production to the U.S. is vital as energy demand skyrockets,” said Congressman John McGuire (VA-05). “I am thankful that this investment will establish a state-of-the-art manufacturing facility in South Boston, to produce necessary large power transformers. This $457 million investment and facility will create more than 800 new high-paying jobs in Virginia’s Fifth Congressional District. I would like to thank Hitachi, President Trump, and Governor Youngkin for working with me to make this a success.”"The United States is a key market for Hitachi, and this investment reflects our commitment to powering America's energy future to meet the accelerating demands for reliable and sustainable solutions to benefit the nation. Leveraging our expertise in IT, operational technology, and advanced products, we are supporting American manufacturing, the development of critical infrastructure, and the rapid expansion of data centers driven by AI adoption," said Toshiaki Tokunaga, President & CEO of Hitachi.“Power transformers are a linchpin technology for a robust and reliable electric grid and winning the AI race. Bringing production of large power transformers to the U.S. is critical to building a strong domestic supply chain for the U.S. economy and reducing production bottlenecks, which is essential as demand for these transformers across the economy is surging. As the global leader in electrification Hitachi Energy is uniquely positioned to deliver critical power solutions for the American market,” said Andreas Schierenbeck, CEO of Hitachi Energy. “Our investments in expanding U.S. transformer manufacturing capacity—including at our new South Boston facility—are already creating good-paying American jobs, strengthening local communities, and reinforcing economic independence. At Hitachi Energy, we are deeply grateful for the leadership and support of the Trump administration, Governor Youngkin, Virginia’s General Assembly, and the Commonwealth’s congressional delegation, who came together to make this critical production capacity possible to power our energy future.”Central to this investment plan is the establishment of a state-of-the-art manufacturing facility in South Boston, Virginia, to produce large power transformers, which support applications like high-voltage transmission, power generation, AI data centers, and large-scale industrial applications. This facility will be built alongside Hitachi Energy’s existing campus and will be the largest manufacturing site for large power transformers in the United States. This facility alone will create more than 825 new jobs in Southside Virginia, offering long-term employment opportunities in engineering, advanced manufacturing, and operations roles. These projects are part of a more than $9 billion USD global investment program, the largest in the industry, under which Hitachi Energy is expanding its manufacturing capacity, R&D, engineering, and partnerships to power the world’s energy system to be more reliable, secure, and resilient.About Hitachi, Ltd.Through its Social Innovation Business (SIB) that brings together IT, OT (Operational Technology) and products, Hitachi contributes to a harmonized society where the environment, wellbeing, and economic growth are in balance. Hitachi operates globally in four sectors – Digital Systems & Services, Energy, Mobility, and Connective Industries – and the Strategic SIB Business Unit for new growth businesses. With Lumada at its core, Hitachi generates value from integrating data, technology and domain knowledge to solve customer and social challenges. Revenues for FY2024(ended March 31, 2025) totaled 9,783.3 billion yen, with 618 consolidated subsidiaries and approximately 280,000 employees worldwide. Visit us at https://www.hitachi.com.About Hitachi EnergyHitachi Energy is a global technology leader in electrification, powering a sustainable energy future with innovative power grid technologies with digital at the core. Over three billion people depend on our technologies to power their daily lives. With over a century in pioneering mission-critical technologies like high-voltage, transformers, automation, and power electronics, we are addressing the most urgent energy challenge of our time – balancing soaring electricity demand, while decarbonizing the power system. With an unparalleled installed base in over 140 countries, we cocreate and build long-term partnerships across the utility, industry, transportation, data centers, and infrastructure sectors. Headquartered in Switzerland, we employ over 50,000 people in 60 countries and generate revenues of around $16 billion USD. https://www.hitachienergy.comhttps://www.linkedin.com/company/hitachienergyhttps://x.com/HitachiEnergy Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, September 5, 2025 - (JCN Newswire via SeaPRwire.com) — NEC Corporation (NEC; TSE: 6701) participated in Locked Shields 2025, an international cyber defence exercise organised by the NATO Cooperative Cyber Defence Centre of Excellence (CCDCOE). NEC also supported design and construction of the exercise environment for the team from Japan, including its network and analysis infrastructure.Locked Shields has been organized by the CCDCOE since 2010 and is one of the world's largest cyber defence exercises. This year, it was held from 6-9 May and involved approximately 40 countries, including NATO member states. The Japanese contingent included representatives from government agencies, including the Ministry of Defense, as well as private sector companies and others. Participating countries were divided into 17 teams, with the delegation from Japan forming a joint team with the delegation from Australia.The exercise aims to improve the ability to deal with cyber-attacks in real-time. It provides training in practical cyber defence and strategic decision-making, including technical and legal responses to complex and simultaneous cyber incidents under realistic scenarios.NEC has enhanced its technical capabilities through the use of the latest cyber security technologies and the accumulation of practical experience, including the provision of cyber security exercises and training, which contributes to strengthening Japan's economic security and the defence of critical infrastructure.NEC will establish a Cyber Intelligence & Operation Centre in Japan this October, which will provide services to the Japanese Government, critical infrastructure providers, and Japanese companies operating internationally.Going forward, NEC will continue contributing to the support of a safe and secure society by helping to ensure economic security through advanced cyber security services.About NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, Sept 5, 2025 - (JCN Newswire via SeaPRwire.com) - TANAKA PRECIOUS METAL GROUP Co., Ltd. (Head office: Chuo-ku, Tokyo; Group CEO: Koichiro Tanaka) announces that its Board of Directors tentatively decided, at a meeting held on August 22, 2025, the appointment of executives for TANAKA PRECIOUS METAL GROUP Co., Ltd., TANAKA PRECIOUS METAL TECHNOLOGIES Co., Ltd., TANAKA PRECIOUS METAL RETAILING Co., Ltd., TANAKA ELECTRONICS Co., Ltd., and EEJA Ltd.TANAKA PRECIOUS METAL GROUP Co., Ltd.TANAKA Corporate Websitehttps://www.tanaka.co.jp/english/Press inquiriesTANAKA PRECIOUS METAL GROUP Co., Ltd.https://www.tanaka.co.jp/support/req/other_contact_e/index.htmlPress Release: https://www.acnnewswire.com/docs/files/20250904.pdf TANAKA’s Executive Appointments Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, Japan, September 4, 2025 - (JCN Newswire via SeaPRwire.com) – Honda Motor Co., Ltd. (Honda) will begin sales in Japan of the all-new Prelude tomorrow, on September 5, 2025.Inspired by the image of gliders soaring freely and boundlessly through the open sky, Honda developed the all-new Prelude under the grand concept of “Unlimited Glide,” striving for a vehicle that evokes the uplifting sensation of gliding gracefully through the air and extraordinary experience that people do not have in their everyday lives. Equipped with a further advanced e:HEV, original Honda hybrid system, this model will become the “prelude” for future Honda specialty sports models in the electrified era.All-new PreludeAll-new Prelude information website: https://www.honda.co.jp/PRELUDE/ (Japanese)Sales plan (monthly, in Japan): 300 unitsKey features of all-new PreludeExterior designThe all-new Prelude features a low, sharp front nose and smooth, yet expressive body lines, which contribute to the uplifting sensation of gliding through the air, as well as a low and wide stance that evokes a sense of dynamic driving. The headlight design expresses the soaring momentum, consisting of a wing-like multifunction light which features finely molded stripes that ascend outward, as well as Adaptive Driving Beam and Active Cornering Light, which enhances visibility during nighttime driving.Moreover, a smooth and clean roofline was achieved by eliminating roof molding with the use of laser brazing technology to produce the roof and the adoption of a glass-printed antenna. The blue accents at the lower center of the front and rear fascias create an elegant flow and the low and sporty stance of the vehicle, representing the grand concept of “Unlimited Glide.” In addition, the exterior styling features meticulous attention to detail, including the flush outer door handles and a black chrome grille louver.Interior design Design evoking the uplifting sensation of gliding through the air was also applied to the interior of the all-new Prelude, ensuring a comfortable space not only for the driver but the front passenger as well. The front seats were designed differently to suit separate needs: the driver’s seat is shaped to hold the driver firmly in place, making it suitable for sporty driving, while the passenger seat offers comfort together with just the right amount of feeling of being enveloped.The concept of the all-new Prelude was expressed with the main interior color option— two-tone Blue & White — a color coordination with a high contrast of white and deep blue. The interior design evokes a sense of exclusivity through its fine detailing, such as the softly shaded white surface material that makes it irresistible to touch, the embroidered Prelude logo that enhances the joy of ownership, and the door lining designed in consideration of smooth leg movement during ingress and egress.Other unique interior design features, such as a low and horizontally expansive line of sight, a flat-bottom steering wheel, alloy paddle shifters, and full-graphic meters designed exclusively for Prelude, enhance a sense of anticipation for an exceptional driving experience this vehicle can offer.Seat (Blue × White)Package design As a new-generation specialty car that offers new value to the customer, the all-new Prelude features a package design that achieves seemingly conflicting qualities —specialty and versatility. In order to realize the proportions worthy of a specialty sports model with a wide, low and smoothly sculpted body, the ratio of the tire outer diameter to overall vehicle height was set at approximately 50%, which has been the standard for sports cars. The tread-to-wheelbase ratio, which greatly affects dynamic performance of the vehicle, was set to achieve both straight-line stability and high cornering performance, referencing sports models Honda has designed in the past.In addition, a cargo space, with a large liftback opening that makes loading and unloading easy, is spacious enough to accommodate two medium-size suitcases*1. The standard 60/40 split rear seatbacks fold flat to greatly expand the available space, enough to accommodate larger items such as two golf bags with 9.5” top*2 or two surfboards*3. Moreover, the cargo space offers remarkable utility and versatility, featuring an underfloor storage compartment, convenient hooks, and a cargo floorboard that can be folded and held in place to serve as a cargo space divider to separate items in the front and the rear part of the cargo hold.*1 Suitcase below approximate measurements of 440mm (17 inches) in length, 240mm (9.5 inches) in width, and 670 mm (26 inches) in height. Some suitcases may not fit, depending on their shape.*2 Some golf bags may not fit, depending on their shape.*3 Shortboards with lengths below 1920mm (6 feet 3 5/8 inches). Some shortboards may not fit, depending on their shape.Dynamics- Honda S+ Shift: New e:HEV technology that stimulates all of the driver’s sensesAll-new Prelude became the first model equipped with the original Honda e:HEV hybrid system with Honda S+ Shift control technology. The Honda S+ Shift emulates a virtual 8-speed transmission on the motor-driven e:HEV system (which has no mechanical transmission) and precisely controls the engine RPM during acceleration and deceleration to realize direct drive response and sharp gear shifting feel as if the vehicle features a stepped transmission system.Moreover, with the combination of the Active Sound Control (ASC) system, which enhances engine sound quality by offering a powerful engine sound in sync with engine RPM through the speaker system, and other technologies such as a highly responsive meter display system that operates in coordination with ASC, the Honda S+ Shift technology stimulates all of the driver’s senses and provides exhilarating driving at the will of the driver, further “synchronizing” the driver and the vehicle.As a control inspired by the glider — the motif of the development concept — the all-new Prelude features a new Coasting Control for the first time among any Honda vehicle. The Coasting Control allows the vehicle to decelerate as if it were in neutral gear. For example, when the driver releases the accelerator early while approaching a red light, by moving the deceleration selector to (+) while in “D (drive) range,” the need to re-accelerate will be reduced, alleviating driver burden of having to use both the accelerator and brake pedals.Furthermore, the all-new Prelude comes with three distinctive drive modes — Sport, GT and Comfort. By combining with the Honda S+ Shift control which accentuates the respective characteristics of each mode, drivers can enjoy six distinctive driving experiences. In addition, an “Individual” mode is also available, allowing the driver to customize the settings in six areas — powertrain, steering, suspension, meter display, engine sound, and adaptive cruise control — and enjoy driving in their personalized driving style. Honda S+ Shift Drive mode switch- Excellent driving performance as a hybrid vehicleHigh-strength steel was applied extensively to achieve both responsive handling and a smooth ride, and an aluminum front hood was adopted to realize body frames that combine rigidity and flexibility. As to aerodynamic characteristics, close attention was paid to the smallest aerodynamic design details to ensure consistent cornering feel will be achieved in the entire speed range, from low to high speeds.Based on the chassis of the Civic Type R, designed to pursue pure sports performance, the all-new Prelude features dedicated settings to achieve both responsive handling and a smooth ride, achieving a chassis befitting a specialty sports model. Key features include the following:- Dual-axis strut front suspension that delivers exceptional handling and road-hugging performance- Adaptive damper system (ADS) that precisely controls damping forces- High-response steering system that offers high rigidity and excellent handling with VGR*4- Driveshaft with uniform rigidity that suppresses torque steer and enhances steering stability- High-capacity front Brembo brakes that deliver linear braking feel and excellent fade resistance to enhance driver confidence- 19-inch large-diameter, high-rigidity wheels with a noise-reducing designIn addition, the all-new Prelude features the first application among all Honda models, of enhanced Honda Agile Handling Assist, which improves steering responsiveness and stability during cornering, with a newly extended range of application including braking. The enhanced Honda Agile Handling Assist enables seamless line-tracing from turn-in to corner exit, contributing to enhanced stability of vehicle behavior even in difficult situations such as obstacle avoidance.*4 Variable Gear RatioFor more details, please visit: https://global.honda/content/dam/site/global-en/newsroom-new/cq_img/news/2025/09/4250904eng-prelude/4250904eng-prelude.pdf Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

Iwakuni City, Yamaguchi Prefecture, September 4, 2025 - (JCN Newswire via SeaPRwire.com) - Mazda Motor Corporation (Mazda) today signed an agreement with Yamaguchi Prefecture and Iwakuni City regarding the construction of the "Mazda Motor Corporation Iwakuni Plant," a new module pack plant for automotive cylindrical lithium-ion battery cells in Iwakuni City, Yamaguchi Prefecture, as announced in January this year. Based on this agreement, construction will commence in November this year, with the aim of starting plant operations in fiscal year 2027. The Iwakuni Plant will be Mazda's first new domestic plant since the start of operations at the Hofu No.2 Plant in 1992.Mazda is promoting electrification through its multi-solution approach to flexibly respond to diversifying customer needs and changing environmental regulations globally. The Iwakuni Plant will play an important role as a foundation supporting the global expansion of electrified products. This plant will assemble modules of automotive cylindrical lithium-ion battery cells sourced from Panasonic Energy Co., Ltd., and package them into battery packs. The plant aims to create a safe, secure, and comfortable workplace, and to contribute to local employment and economic development.Mazda is committed to delivering the "joy of driving" and smiles to customers around the world by incorporating the technology and high quality produced at the Iwakuni Plant into its electric vehicles.New Plant OverviewNameMazda Motor Corporation Iwakuni PlantProductCylindrical Lithium-Ion Battery Packs for Automotive UseProduction CapacityAnnual capacity of 10 GWh at maximumLocation3915 Minamishirazaki, Tsuzu, Iwakuni City, Yamaguchi PrefectureLand AreaApproximately 190,000 m²Construction StartNovember 2025Start of operationsIn Fiscal Year 2027 Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, Japan, September 4, 2025 - (JCN Newswire via SeaPRwire.com) — NEC Corporation (NEC; TSE: 6701) today announced that it will begin a proof of concept (PoC) for introducing an Earthquake Early Warning System (EEWS) in Colombia. This follows NEC’s selection to undertake the "Project for Conducting a Feasibility Study on the Introduction of ICT-Based Early Earthquake Detection and Analysis Technology in the Republic of Colombia," for which Japan’s Ministry of Internal Affairs and Communications had issued a public solicitation for proposals.With the ultimate goal of providing an EEWS overseas for the first time, NEC plans to conduct this PoC in Colombia between September 2025 and March 2026 to verify the effectiveness of the EEWS and identify any potential issues.The role of EEWS in earthquake early warningsBackgroundColombia is a seismically active nation located along the circum-Pacific Ring of Fire. Extensive human and material damage were reported following a magnitude 6.2 earthquake in Colombia’s Department of Quindio in January 1999 and another that shook the nation’s capital of Bogota in August 2023 with a magnitude of 6.3. Since then, calls have grown for the establishment of a system to swiftly provide the government and the general public with earthquake information.NEC has a proven track record for reliable operation of its EEWS, which it has been providing for the Japan Meteorological Agency (JMA) since 2007. NEC now seeks to contribute to earthquake preparedness in Colombia with the introduction of a new EEWS.Introduction of EEWSEEWS is a system that calculates the epicenter and magnitude from the initial tremors (P-waves) detected by seismometers, enabling it to warn of strong shaking before the main tremors (S-waves) arrive (though in some cases, it may not arrive in time for the strong shaking). Applications include alerting the public via mass media and mobile phones, automatically shutting down infrastructure, and controlling elevators, thereby contributing to the reduction of human and material damage.PoC overviewLeading up to this PoC, NEC was selected by Japan’s Ministry of Internal Affairs and Communications in the public solicitation for proposals it issued in fiscal year 2024 for the "Project for Conducting a Feasibility Study on the Introduction of ICT-Based Early Earthquake Detection and Analysis Technology in the Republic of Colombia," and conducted a preliminary survey from January to March 2025. In this preliminary survey, NEC input seismometer data from 12 past Colombian earthquakes with a magnitude of 5.0 or larger into EEWS for analysis. This historical earthquake data from Colombia was then run on EEWS to confirm that results predicting the epicenter and magnitude could be produced.Building off this preliminary survey, NEC will be connecting existing seismometers installed in Colombia with EEWS online to conduct real-time analysis of the acquired data in the upcoming PoC.Seismic observation point and epicenter data used in the preliminary surveyScreenshot of EEWS monitorLeveraging the outcomes of this PoC, NEC will move forward with its feasibility study for introducing EEWS in Colombia, aiming to contribute to the improvement of earthquake preparedness in the nation.Related LinkDisaster preparedness: Products & Solutions | NEChttps://www.nec.com/en/global/solutions/disaster-management/index.htmlAbout NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, September 4, 2025 - (JCN Newswire via SeaPRwire.com) - Eisai Co., Ltd. (Headquarters: Tokyo, CEO: Haruo Naito, “Eisai”) announced today that the company will deliver a total of 11 presentations, including clinical data on the selective orexin 2 receptor agonist (OX2R)E2086 and the latest findings on its in-house discovered orexin receptor antagonist lemborexant (product name: DAYVIGO®) at the World Sleep Congress (World Sleep 2025) to be held in Singapore from September 5 to 10.Key presentations include results from the Phase Ib clinical study exploring the efficacy (Proof of Mechanism) of E2086 in people diagnosed with narcolepsy type 1 (NT1) and the Phase IV clinical study(SELENADE Study) investigating the effect of lemborexant in people whose insomnia was comorbid with depressive episodes of major depressive disorder and bipolar disorder (Poster 3-133). The company will also host a symposium introducing the latest evidence on lemborexant in Asia.Eisai considers neurology, including sleep disorders such as insomnia and narcolepsy, as a therapeutic area of focus. Eisai strives to create innovative products in therapeutic areas with high unmet medical needs as soon as possible, and will further contribute to addressing the diverse needs of, as well as increasing the benefits provided to, those living with neurological diseases and their families.For more details, please visit: https://www.eisai.com/news/2025/pdf/enews202561pdf.pdf Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, Japan, September 3, 2025 - (JCN Newswire via SeaPRwire.com) – Honda today presented the world premiere of four large-size outboard motors, BF350, BF250, BF225 and BF200, featuring a new “Sporty White” color option at the HISWA te Water (HISWA in-water Boat Show) now underway (Sept. 3–7, 2025) in Lelystad, the Netherlands. All four models with the new Sporty White color option will go on sale in Europe today, Sept. 3, and the BF350 and BF250 will go on sale in Japan on Sept. 4, 2025.BF350 in new Sporty White color (installation sample)Based on the already-available “Grand Prix White” color, the new Sporty White color option features a black stripe that creates a two-tone color scheme, achieving distinctive styling with a sense of exclusivity. Since it was first adopted in 2019 for the previous version of the BF250, the Sporty White color scheme has been well received by many customers enjoying marine recreation, particularly in Europe and Japan, for its impressive graphics and sporty design.The new Sporty White color option added this time for the four large-size outboard motors inherits the original design concept of expressing a racing image, while achieving coloring that is perfectly compatible with the refreshed, simple and clean styling design of the motors. By combining the prominent vertical display of the horsepower rating with the red Honda logos positioned on both sides, the design expresses Honda racing DNA, emphasizing both sportiness and a sense of premium quality.The BF350, the flagship model of Honda outboards that went on sale first in Japan in February 2024, is equipped with a V8 350-horsepower engine designed exclusively for this outboard motor to deliver powerful propulsion performance. The all-new BF250, BF225 and BF200, which went on sale first in Japan in May 2025, feature a refreshed styling design aligned with the design concept of BF350. With excellent fuel efficiency and outstanding durability, these Honda outboard motors are used for a wide range of purposes such as fishing and marine leisure.Official website of the HISWA te Water 2025 (HISWA in-water Boat Show)https://www.hiswatewater.nl/ Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

Toyota City, Japan, September 3, 2025 - (JCN Newswire via SeaPRwire.com) - Toyota Motor Corporation (Toyota) announced today that it has joined "TOKYO H2," a new project launched by the Tokyo Metropolitan Government on September 3 aiming to make Tokyo a global leader in hydrogen. As part of this public-private initiative, the Crown has been introduced into the fuel cell taxi fleet to expand adoption.The Crown combines the exceptional quietness unique to a fuel cell vehicle (FCEV) with spacious rear seating and excellent ease of entry and exit, delivering comfortable and a premium travel experience unmatched by conventional taxis.To achieve the Tokyo Metropolitan Government's target for introducing fuel cell taxis (approximately 600 by fiscal year 2030), Toyota will also aim to introduce 200 units by fiscal year 2025 and provide support.To coincide with the project's launch, Toyota has renovated and reopened the TOYOTA MIRAI Showroom in Minato City, Tokyo originally established in 2015 as an information center on fuel cell vehicles (FCEVs) and hydrogen as the TOKYO H2 HUB. The new facility will serve as a hub for collaboration among companies and organizations working toward a hydrogen society, contributing to the project's advancement and to the broader adoption of hydrogen energy.TOKYO H2 project logoThe TOKYO H2 project, led by the Tokyo Metropolitan Government, aims to accelerate public―private efforts to use hydrogen, with a focus on commercial mobility such as fuel cell taxis and trucks. Participating companies and organizations will implement a variety of hydrogen-related initiatives. By unifying the project's logo and design, the spread of hydrogen is being made visible throughout the city, raising understanding and interest across Tokyo. Going forward, in addition to taxis, initiatives in the commercial sector will be rolled out in stages.Toyota supports the Tokyo Metropolitan Government's commitment to advancing the social implementation of hydrogen. By introducing the Crown to the fuel cell taxi fleet, Toyota aims to make the hydrogen society more familiar and accessible in everyday life. In addition, by generating substantial hydrogen demand, Toyota seeks to create a virtuous cycle across the supply chain. Working together with the Tokyo Metropolitan Government and with companies and organizations engaged in hydrogen, Toyota will continue to expand partnerships and contribute to realizing a Tokyo that leads the world with hydrogen.Toyota positions hydrogen as an important energy source and, together with many partners, is advancing a wide range of initiatives to promote its use across all areas-producing, transporting, storing, and using. Going forward, Toyota will continue to accelerate efforts to expand the use of hydrogen and contribute to the realization of a hydrogen society.Fuel cell taxi Crown (FCEV)"Achieving zero, and adding new value beyond it"As part of efforts to pass our beautiful "Home Planet" to the next generation, Toyota has identified and is helping to solve issues faced by individuals and overall society, which Toyota calls "Achieving Zero," hoping to help reduce the negative impacts caused by these issues to people and the environment to zero. Additionally, Toyota is also looking "Beyond Zero" to create and provide greater value by continuing to diligently seek ways to improve lives and society for the future.About Beyond Zero https://global.toyota/en/mobility/beyond-zero/Toyota Motor Corporation works to develop and manufacture innovative, safe and high-quality products and services that create happiness by providing mobility for all. We believe that true achievement comes from supporting our customers, partners, employees, and the communities in which we operate. Since our founding over 80 years ago in 1937, we have applied our Guiding Principles in pursuit of a safer, greener and more inclusive society. Today, as we transform into a mobility company developing connected, automated, shared and electrified technologies, we also remain true to our Guiding Principles and many of the United Nations' Sustainable Development Goals to help realize an ever-better world, where everyone is free to move.SDGs Initiatives https://global.toyota/en/sustainability/sdgs/ Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO, Japan, September 3, 2025 - (JCN Newswire via SeaPRwire.com) – Honda Motor Co., Ltd. (Honda) today announced that a member of the Honda Running Team, Nagiya Mori, has been named to represent Japan in the men’s 5000m event at the World Athletics Championships Tokyo 25 (WCH Tokyo 25), in Tokyo, September 13–21, 2025.Since joining Honda in 2022, Mori has steadily improved his competitive performance. This season, he has been demonstrating his competitive toughness, recording the second-fastest time ever by a Japanese runner in the men’s 3000m event at the Seiko Golden Grand Prix held in May. Later that month, at the Asian Athletics Championships held in Korea, he earned a bronze medal by competing strongly against some of Asia’s top runners. Building on these achievements, Mori secured a berth at the WCH Tokyo 25. In this first opportunity to face world-level competition, he will boldly take on the challenge of competing against the world’s top-class runners.At the WCH Tokyo 25, the men’s 5000m heats are scheduled on Friday, September 19, with the final on Sunday, September 21, 2025, at the Japan National Stadium.As official partner of the WCH Tokyo 25, Honda will provide environmentally-responsible official vehicles, including electric vehicles, based on its theme — “Maximizing the excitement and inspiration from the athletes’ great performance, through the realization of an environmentally-responsible and safe event by providing a wide variety of mobility products equipped with innovative technologies.”Based on the Honda vision for its sports activities – “To increase the number of people who take on challenges through sports activities and make the lives of all people more enjoyable” – Honda will continue to support various athletes who take on challenges toward the realization of their own dreams.Comments by Satoshi Ogawa, Manager of the Honda Running Team“We are very pleased and proud that another member of our team – this time Nagiya Mori, following in the footsteps of Naoki Koyama for the men’s marathon – was selected to represent Japan at the World Athletics Championships Tokyo 25. This will be his first time competing in an international event. We hope he will leverage his natural and outstanding racing instincts and boldly take on the world’s top-class competitors. In order to embody the Honda Challenging Spirit at the pinnacle of a global athletics competition, we will help him prepare for his race with passion and determination. We greatly appreciate your continued support and cheers.”Comments by Nagiya Mori, Honda Running Team Athlete“From my childhood up to now, the thing I’ve loved the most is running and then track and field, which I discovered in my junior high school days. Over time, it became the center of my life. Among my dreams, the one I thought was impossible yet could never give up on was to wear the uniform of the Japan national team and compete at the World Athletics Championships. I am truly happy to have finally realized that dream. I will do everything I can to prepare myself until the day of the race. I would appreciate it if you could cheer me on!”Nagiya Mori Profile Date of Birth: July 3, 1999 (26 years old) Place of Birth: Fukuoka, Japan Teams: Ohori Senior High School Chuo University Honda Running Team Key accomplishments to dateYearEventResult2025109th Japan National Athletics ChampionshipsMen's 5000m2nd26th Asian Athletics ChampionshipsMen's 5000m3rd2024108th Japan National Athletics ChampionshipsMen's 5000m2nd Honda is supporting the World Athletics Championships Tokyo 25, as an Official PartnerReference“Honda Signs Sponsorship Agreement to Provide Electrified Vehicles at World Athletics Championships Tokyo 25”https://global.honda/en/topics/2024/ce_2024-11-07eng.htmlHonda special World Athletics websiteHonda will continuously share its stories and passion for supporting athletes who take on challenges in the WCH Tokyo 25 and introduce a wide variety of Honda vehicles serving active roles during the event.URL: https://global.honda/jp/WorldAthletics/ (Japanese)https://global.honda/en/WorldAthletics/ (English) Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com

TOKYO and CAMBRIDGE, Mass., Sept. 3, 2025 - (JCN Newswire via SeaPRwire.com) - Eisai Co., Ltd. (Headquarters: Tokyo, CEO: Haruo Naito, “Eisai”) and Biogen Inc. (Nasdaq: BIIB, Corporate headquarters: Cambridge, Massachusetts, CEO: Christopher A. Viehbacher, “Biogen”) announced today that Eisai has initiated the rolling submission of the Supplemental Biologics License Application (sBLA) to the U.S. Food and Drug Administration (FDA) for lecanemab-irmb (U.S. brand name: LEQEMBI®) subcutaneous autoinjector(SC-AI), LEQEMBI IQLIK, as a weekly starting dose after the FDA granted Fast Track Status. LEQEMBI is indicated for the treatment of Alzheimer’s disease (AD) in patients with Mild Cognitive Impairment(MCI) or mild dementia stage of disease (collectively referred to as early AD).The sBLA is based on evaluation of subcutaneous (SC) lecanemab administration across a range of doses and as part of sub-studies within the Phase 3 Clarity AD open-label extension (OLE), following the 18-month core study in individuals with early AD. Should the FDA approve the LEQEMBI IQLIK 500mg SC dosing regimen (two 250 mg injections), the autoinjector could be used to administer a once weekly starting dose, as an alternative to bi-weekly (every two weeks) intravenous (IV) dosing. This would expand the option for patients and care partners to receive LEQEMBI treatment from initiation to maintenance at home, offering a choice between IV and SC administration. The current injection time for each LEQEMBI IQLIK autoinjector takes approximately 15 seconds. The SC formulation also has the potential to reduce healthcare resources associated with IV maintenance dosing, such as preparation for infusion and nurse monitoring, while streamlining the overall AD treatment pathwayAD is a progressive, relentless disease with amyloid beta (Aβ) and tau as hallmarks that is caused by a continuous underlying neurotoxic process that begins before amyloid plaque removal and continues afterward.1,2,3 Only LEQEMBI fights AD in two ways – targeting both amyloid plaque and protofibrils*, which can impact tau downstream. LEQEMBI is currently approved in 48 countries and is under regulatory review in 10 countries. Eisai serves as the lead for lecanemab’s development and regulatory submissions globally with Eisai and Biogen co-commercializing and co-promoting the product and Eisai having final decision-making authority.*Protofibrils are believed to contribute to the brain injury that occurs with AD and are considered to be the most toxic form of Aβ, having a primary role in the cognitive decline associated with this progressive, debilitating condition.1 Protofibrils cause injury to neurons in the brain, which in turn, can negatively impact cognitive function via multiple mechanisms, not only increasing the development of insoluble Aβ plaques but also increasing direct damage to brain cell membranes and the connections that transmit signals between nerve cells or nerve cells and other cells. It is believed the reduction of protofibrils may prevent the progression of AD by reducing damage to neurons in the brain and cognitive dysfunction.2 INDICATIONLEQEMBI® is indicated for the treatment of Alzheimer’s disease (AD). Treatment with LEQEMBI should be initiated in patients with mild cognitive impairment (MCI) or mild dementia stage of disease, the population in which treatment was initiated in clinical trials. For more details, please visit: https://www.eisai.com/news/2025/pdf/enews202560pdf.pdf Copyright 2025 JCN Newswire via SeaPRwire.com. All rights reserved. www.jcnnewswire.com